Tag Archives: craftsmanship

To make a cube bookshelf

DSCN5947[sqr-basic-nostalgic-tilt]

Because she asked for a bookshelf, I built one. A simple cube bookshelf was the plan. Nothing fancy. Something simple and useful. Something to fit under the window.

DSCN5897[sqr-basic-lofi-tilt]

To begin with, I visited the local lumber shop for 1″x12″s and 1″x2″ pine boards. Also, I picked up some screws and finishing nails. Already had wood glue, left over wood stain and finish in the garage.

DSCN5924[sqr-basic-lofi-tilt]

If I was a master craftsman, I would have made the shelf without screws and nails. Due to lack of equipment (like a proper workshop with a bunch of clamps, a router, and maybe a tenon jig) and time (the ever elusive weekend commodity), dado joint shelves were replaced with two-inch screws and Gorilla® Wood Glue. The only power tools used were a cordless drill/driver, a sander and a jig saw.

DSCN5952[sqr-basic-nostalgic-tilt]

After everything was glued, screwed and sanded, wood stain was selected. The Minwax can of espresso stain was half full, and was sufficient to cover the bookshelf. The stain dried quickly, but I let it dry overnight to let it set.

DSCN5951[sqr-basic-nostalgic-tilt]

Two coats of wood finish completed the project. The bookshelf was installed in our living space with a vase of roses atop it.

Request for a companion cube bookshelf arrived. More wood was purchased and cut. Request for bookshelf with a honey-colored stain finish followed. A quart of Minwax wood stain was purchased. And so on.